>>>>>>>>>HKS Hybrid Sports Oil Filter - M20 X P1.5
HKS Hybrid Sports Oil Filter - M20 X P1.5 View larger

52009-AK005

HKS Hybrid Sports Oil Filter - M20 X P1.5

New product

7 Items

28.00 CHFtax incl.

Don't know what Filter to choose?

Check our application list: Application list


[HYBRID SPORTS OIL FILTER]

  • A new concept oil filter which improves oil pressure drop and flow properties by approximately 30% compared to current sports oil filters. Large diameter of "Super Intake Hole" and newly developed low resistance hybrid filter allow low-pressure loss. Engine response is also improved by reducing the stress on the engine.
  • Most sports oil filters are prerequisite for using the high viscosity oil and therefore filter paper strength is prioritized whilst sacrificing absolute pressure loss properties. HKS Hybrid Sports Oil Filter has readdressed filter strength and overall structure to provide the oil flow that the engine requires and pursue HKS' ideals in what is required from a sports oil filter.
Composition

In the interest of general versatility, unit size has been standardized at φ68x65mm. Fitment bolt sizes are M20-1. 5P and 3/4-16 UNF. Filtration performance JIS standard is 25μ whereas HKS is 20μ making the filter compatible with most standard engine requirements.

Filter Life

Under normal usage, it is recommended that the filter is changed in every 10,000km or 6months. For Sports driving, the recommended distance is approximately 1/3 - 1/2 of the previously mentioned figure (as the engine revolutions are several times that of normal driving). However, to maintain optimum low-pressure loss properties, it is recommended to change the filter every 3000km when an oil change is performed.

of_img_02.png

■Compatibility Condition
For φ68×H65
  • Please confirm that the filter unit size of φ68×H65 and screw size.
  • Oil filter is compatible with vehicles or oil attachments where the oil filter seal internal diameter is less than φ55.5.

of_img_03.png

For φ80×H70
  • Please confirm that the filter unit size of φ80 x H70 and screw size of (M20-P1.5 or UNF3/4-16).
  • Oil filter is compatible with vehicles or oil attachments where the oil filter seal internal diameter is less than φ68.5.

of_img_04.png

CAUTION

Installation to a vehicle which does not meet the above conditions may result in engine damage due to leakage of oil.

Performance

HKS Hybrid Oil Filter's low pressure loss properties means that even standard specification engines can benefit from reduced engine resistance and improves engine response.

of_graph_01.png

Super Hybrid Oil Filter

of_img_05.jpg

- About Oil Filter -

The diameter of oil filter screw

  Pitch
(mm)		 External diameter
(mm)		 Root dia.
(mm)		 Effective dia.
(mm)		 Crest angle Using Maker
UNF4/3-16 1.5875 19.011 17.063 18.019 60° Toyota, NIssan, Suzuki, Daihatsu
M20 P=1.5 1.500 20.000 18.376 19.026 60° Nissan, Honda, Mitsubishi, Mazda

  • Both sides are very close to each other, so UNF center bolt M20 filter can be installed(but size is big)

Accessories

Customers who bought this product also bought:

30 other products in the same category: